Forty one years of searching for good quality parts has been a blast. A treasure hunt. I have had moderate luck finding vintage components and enjoy selling them worldwide. Occasionally, we can no longer locate certain mechanical parts that our customers desire. So we contract to have them made. Fighting the urge to stock what everyone else does. Import that. Knock-off this. Well, recently we were put in the corner by a manufacturer we have used for decades. One product they made for us for many years has slowly degraded with poor workmanship and inferior components. The last batch was rejected for multiple reasons and I needed to decide whether to continue with our trademark Turns Counter we have sold for 25 years, or retire it. What happened next was a complete upgrade and rebuild. My dad always said “If it’s worth doing – it’s worth doing right!” We took on the full production of our magnificent counter and now have something we are proud of.
“Since every piece of equipment that uses a turns counter has no capacity for skipped turns, we solved the problem.”
We started over at ground level. The main problem other knock-off counters have is the shaft moves laterally when the knob is cranked. This action in turn causes slop in the gear placement which in turn interrupts the counting. Since every piece of equipment that uses a turns counter has no capacity for skipped turns, we solved the problem.
In our counter, the shaft is locked in place both in forward and aft lateral moments. Another feature of the rejected counter are extremely cheap plastic gears. They are held in place with friction and are inferior at best. We have solved the problem with stainless steel miter gears made exclusively for our counter. Our new SHW-TCV Turns Counter is now flying off the shelves and can be found on commercially produced equipment in the medical world as well in amateur radio projects.